440-799-8235
A gem of an office sign is installed at HC Murray Group in Independence, Ohio for their new office space.
HC Murray Group moved into a new office space in Independence, Ohio and called us for ideas to install a nice office sign as a focus for their entry way. We came on site during construction and reviewed several available materials and narrowed it down to acrylic or aluminum lettering. Our survey included taking photos of the proposed wall space and taking measurements. We then provided a rendering of the options on the picture of the wall so they can see if it looks like the vision they anticipated. Above and below pictures capture the end results and they were thrilled.
The top line of the office sign is made of 10 inch high aluminum letters with a brush finish approximately 1/2" thick. The black line and the black letters are made of shinny acrylic that is 3/8 inches thick. All letter components are offset from the wall 1/4" to give it a slight shadow affect which is enhanced by the spot light from above. We arrived with a pattern of the display done on paper that was tapped to the wall. This provides a check for the client to see how high they will be and to make sure it is properly centered as expected. The pattern includes targets for drilling holes. The holes match exactly the studs protruding from the back of the letter so they fit neatly into the wall for a secure snug fit. This method takes a little more time but the results provide a quality install so the letters and logos do not move around afterwards. The studs are fitted with a sleeve so that the offset looks professional.
Epic Signs & Graphics has access to many types of letters for interior or exterior business sign applications. Metal letters can be fabricated as a cast or from flat material. Cast letters are shown below. We have access to several foundries around the country to produce aluminum or bronze cast letters. Cast metal letters have a distiinctive look that are many times, used in universities or companies such as banks. They have a thick and stately look and are very durable.
Pictured above are flat cut letters and are just as the name implies, flat on both sides. This material provides opportunties for specialized cuts to do logos or high style lettering. They are fabricated with high precision either using high pressure water or lasers. It is possible to use aluminum, stainless steel, bronze, brass, or copper. Thicknesses can be from 1/8" up to 1/2" and can be as tall as 42 inches. We will provide a review of your proposed art work to see if it could be custom cut or we can modify designs if needed.
HC Murray is a group of dedicated and experienced insurance professionals. Their staff takes pride in being curteous and focus on the client rather than what is best for the insurance company. They provide insurance for employee health programs, business, long-term care, medicare and disability.
Epic Signs and Graphics was thrilled to get a call from HC Murray and provide a sign they can be proud of in their lobby. Give us a call or reach us through our web site to get a free consultation and see how we can make your business entry area one to make you proud.
